Ping Pong Training Robot Serve Frequency Spin Forword , PVC Table Tennis Ball Machine

Product Name: PVC Table Tennis Robot Serve Frequency Spin Forword for Table Tennis Recreation

Style number: UDONE-TT

Installation instructions:

1. Assemble easily and quickly without tools and equipment, assemble with 3 parts together,

plug in the power to start the UDONE-TT

2. Put the base and upper parts connect to the host, and turn around to tighten

3. Make Control switch stretched to the edge of the ping pong table

4. Plug the power connector into the host, and power on, make UDONE-TT ball machines operating

for 2 minutes without balls.

5. Finally , Install recycling net on the table tennis table.

Product parameter:

1.Serve frequency:maximum 70 balls per minute

Minimum 30 balls per minute

2. Maximum capacity: About 110pcs standard balls

3. G.WT.: 2.5KG

4. Packing size: 32*31*28 cm

5. Spin grade: Forward spin, down spin, not spin

6. Power: 110V-240V

Operating instructions:

1. With the control switch, you can operate easily the ball machine without leaving the table.

2. Serve machine can accommodate about 110 balls

3. Adjust the spin button to find the ball spin you need.

4. Adjust Swing frequency to find the serve frequency you need.

5. Adjust the placement on the table you need.

Serve frequency: adjust from left to right, and slow to fast

Matters needing attention

1. When you start serving machine, make sure that the host has no balls to avoid causing serve blocking. If balls in the host, please turn off the power and take out of the ball from the host, and then continue to use it.
2. Cleaned up small junk to the host around wheels, use tweezers to clip out, ensure to operate normal.
3. When the machine is cleaned, be sure to turn off the power.

Product attention and maintenance:

1. If the serve machine do not work , you can make serve machine operate for a few minutes at first,

then put the ball in it.

2. New ball has powder on the surface, friction is very large to cause balls not serve well, please clean

the new ball before play.

3. Cleaning regular the balls surface well, periodic cleaning robot walking fairway, no dust, hairs and

skin debris in machine.

4. No bad, deformation and shape changing balls in machine.

5. When clean the balls, please shut off the machine power.